李宗瑞视频全集1. Applies DAGE VR950 New Technology Open-Transmissive X-ray Tube, 160kV 3W Tube Power
李宗瑞视频全集2. Provable <0.95 (950nm) Feature Recognition Tube
李宗瑞视频全集3. Nordson DAGE 1.33Mp @ 10fps Long Lifetime CMOS Flat Panel Detector including Real Time Image Enhancements
李宗瑞视频全集4. Built-in AXiS (Active X-ray Image Stabilization) for anti-vibration control.
李宗瑞视频全集5. Geometric Magnification 1,400x, System 4,200x
6. Up to 65° Oblique Views without Loss of Magnification best for hard to seen defects
李宗瑞视频全集7. Handles maximum board size up to 29” x 22.8” (736 x 580mm) within a compact footprint
1. Customized: meet individual and special function needs
2. High resolution which can judge tiny adverse
3. High sharing capability with changing wafer spec only needed adjust magnification
4. Picture memory: memory front face, back face NG and OK
5. Picture show: can show NG and OK picture on all stations in time
6. Sorting with customized set: can set the NG name and blowing classification
7. SSD Hard disk.: fast machine start time with advanced computer hardware
8. Considerate interface: easy to handle
9. High positioning accuracy : super high resolution ENCODER with no wrong judge
10. Manufacturing statistics show: can show NG statistics in all stations
李宗瑞视频全集1. Minimum conversion between devices & carrier tape widths
李宗瑞视频全集2. Handles micro devices down to 0.6x0.3mm
李宗瑞视频全集3. Non-contact device alignment
4. Vision guided PnP
5. Multiple operation modes
李宗瑞视频全集1. Boat Gripper & Step Motorized Feeding System.
李宗瑞视频全集2. Strip & Cover Plate Picker Gripper & Vacuum Picker.
3. Automatic Magazine and Strip Width Conversion for Reduction of Set up time (62mm Ù74mm).
李宗瑞视频全集4. ID Inspection Vision System for Good/Reject Unit Count & Orientation Detect function.
1. Multiple Magazine Loader (3~6 Magazines)
2. Automatic Strip Width Conversion (Single & Matrix Boat)
3. Mechanical Pre-alignment by Precise Jig
李宗瑞视频全集4. X- Y -Z Position Control By Servo Motor
5. Flux Squeegee & Pin Dotting Fluxing
6. 5 Vision Inspection System
（1） PCB PRS Vision (1.4M CCD)
李宗瑞视频全集（2） Auto Set-Up (1.4M CCD)
（3） Ball Volume Detect Vision (1.4M CCD)
（4） Ball Tool Inspection Vision (8M CCD)
（5） Ball Quality Inspection Vision (8M CCD)
1. High resolution of CCD picture scanning system, can correct the material dimension and material inputting direction.
2. Smart scanning function which can solve the no material dispensing and material stuck problems.
3. Dispensing valve with glue needle can correct, clear and inspect the operation.
4. With NSW special accurate and high speed dispenser PP2D, can double the production.
5. Multi-function dispenser mode can improve the LED packaging reliability and performance.
6. Ndisp3 software operation interface will adapt to many kinds of changing production.
7. Small Machine size can well save workshop room.
1. High Speed Inspection Head for Higher Throughput
2. Lower Cost $ per unit LED
李宗瑞视频全集3. Faster Return-of-Investment (ROI)
4. Multi Wires on Multi Dice Inspection for more device configuration
李宗瑞视频全集5. Foreign Material Inspection (Optional)
6. Simplified Angle View Setup
李宗瑞视频全集7. Simplified Recipe Setup
8. Reinforced Machine Base for Lower Vibration
1. Fastest and most accurate bond tester
2. Ultimate speed and flexibility
3. Extensive application capability
1. High versatile
李宗瑞视频全集2. Switch applications in just seconds
李宗瑞视频全集3. Increased efficiency
4. Ultimate step back accuracy
李宗瑞视频全集5. Ultimate correlation
李宗瑞视频全集6. Intelligent software
1. Bond test system of DAGE 4000 is used in assembly industry of semiconductor, optical unit and PCB. Apply to all kinds of test in pull and shear with high accuracy, high repeatability, and high reoccurrence.
2. Easy Rocker control.
3. Motor driver on X,Y work station.
4. apply in all kinds of package and test in gold and aluminium wire bonding force in semiconductor as well as the bonding force of COB package, optical, LEB,SMT assembly, original and board.
1. Flexible configuration accommodates the full range of strip dimensions and magazine designs
2. Advanced robotic handling system minimizes strip handling, pushing, pulling and reduces operator intervention
3. New camera-based material tracking provides 100% plasma treatment validation
4. High-efficiency, application specific, plasma chamber design offers Direct or Ion Free plasma treatment modes
5. Significantly smaller system footprint and magazine reuse capability save space and help lower cost of ownership
1. Highly uniform plasma with fast treatment rates
2. Production-ready strip handling system
3. Easy-to-use touch screen graphical user interface (GUI)
4. Service components accessible via front pull-out shelves
5. High throughput, small footprint, low cost of ownership
1. Touch screen control and graphical user interface give real-time process information
2. Flexible shelf architecture allows process of a wide variety of piece parts, components or carriers
3. 13.56MHzRF generator with automatic matching network delivers excellent process repeatability.
4. Convenient facility hook-ups for periodic calibration requirement used in validation process.
1. PLC controller with touch screen provides an intuitive graphical interface and real time process representation.
2. Flexible shelf architecture allows processing of a wide variety of part carriers in either direct or downstream plasma mode.
3. The 13.56 MHz power supply has automatic impedance matching for unparalleled process reproducibility.
4. Proprietary software control system generates process and production data for statistical process Control.
1. Dual cassette load station to minimize idle time.
2. Multi-sizes capable aligner with minimal hardware change-over required.
3. Robust robotic wafer engine.
4. Integrated wafer recognition for high reliability wafer handling.
5. Compact design minimize floor space.
6. Unique kits allow fast change-over between wafer sizes and supports multi-load for smaller wafer sizes.
李宗瑞视频全集7. Highly uniform treatment and fast throughput.
1. High quality with low cost
李宗瑞视频全集2. Flexible production with no dust
3. High accuracy sugulation of complex graph
4. Small covering area and low energy consumption
李宗瑞视频全集5. Easy operation
1. Patented design
2. Flexible for all package type-BGA/QFN/LGA/SIP/Flex BGA/Micro SD and other
3. New twin track technology sawing solution, proven at least 50% to 100% UPH improvement vs single track solution
4. 2x2 package handling capability
5. Latest 3x High speed linear motion with total 18 pickers
6. Live-bug orientation handling
7. Noise level<70 dB
李宗瑞视频全集8. Full set of vision reject sorting function
1. High accuracy and high resolution
2. High speed batches inspections
3. All kinds of updated software
李宗瑞视频全集4. High safety with easy operation
1. Simple cleaning process and short drying time
2. Good stability
3. Easy maintenance
4. Low cost of investment
1. Sturdy and stable design
2. User friendly 'soft touch' LED membrane control panel
3. Pneumatic clamps provided for magazine alignment
4. Pneumatic pusher's pressure regulated
5. High throughput with short magazine change-over time
李宗瑞视频全集6. SMEMA compatible